Introduction

This blog is a user's perspective on the Micro Four Thirds camera system. Read more ...

Lens Buyer's Guide. Panasonic GH4 review.

My lens reviews: Olympus 9mm f/8 fisheye, Lumix G 12-32mm f/3.5-5.6, Leica 25mm f/1.4, Lumix X 12-35mm f/2.8, Lumix X 35-100mm f/2.8, Sigma 30mm f/2.8, Sigma 19mm f/2.8, Lumix X PZ 14-42mm f/3.5-5.6, Lumix X PZ 45-175mm f/4-5.6, Olympus M.Zuiko 45mm f/1.8, Panasonic Lumix G 100-300mm f/4-5.6, Panasonic Leica Lumix DG Macro-Elmarit 45mm f/2.8 1:1 Macro, Panasonic Lumix G 45-200mm f/4-5.6, Panasonic Lumix G 20mm f/1.7 pancake, Panasonic Lumix G 14mm f/2.5 pancake, Panasonic Lumix G HD 14-140mm f/4-5.8, Panasonic Lumix G HD 14-140mm f/3.5-5.6, Panasonic Lumix G 8mm f/3.5 fisheye, Lumix G 7-14mm f/4, Samyang 7.5mm f/3.5 fisheye, Tokina 300mm f/6.3 mirror reflex tele, Lensbaby 5.8mm f/3.5 circular fisheye lens
The blog contains affiliate links. As an Amazon Associate I earn from qualifying purchases.

Wednesday 11 May 2011

Bad aperture diaphragm in Lumix G 14-42mm f/3.5-5.6

When investigating the bokeh of some Panasonic Lumix lenses, it came to my attention that out of focus highlights using the Lumix G 14-42mm f/3.5-5.6 kit lens was irregularly shaped when stopped down. I decided to take a closer look, to see what the problem is.

First, I took a picture in which I set the lens to tele (42mm), focused as close as possible, and placed a flashlight in the background. The flashlight renders out of focus. Here is the full image at f/5.6, the maximum aperture. The flashlight is placed in the centre of the image:


To see how the roundness changes when stopping down, I have made 100% crops from the centre at various apertures:


This verifies the problems I saw when studying the bokeh. The out of focus highlights are definitively not circular. It looks like the aperture diaphragm blades are misaligned.

Micro Four Thirds lenses are always wide open when powering the camera down. This means that normally, you cannot look at the diaphragm blades from the inside, since the aperture is wide open.

However, a trick is to stop down the lens, and then remove the camera battery. That way, you can remove the lens while stopped down. This procedure is not exactly recommended by the manual, so use with caution.

Using this trick, I could photograph the back side of the lens when stopped down:


Here it is clear that some of the blades are misaligned. Thus, the resulting image has non-round out of focus rendering.

I've made a video showing the stopping down of the aperture blades. The apertures goes from f/3.5 down to a full close in 1/3 stops.



I filmed it using the Panasonic Lumix GH2 and the Leica Lumix DG 45mm f/2.8 macro lens. To get the needed magnification, I used the new Extra Tele Converter (ETC) mode.

Here's a photo of the setup for capturing the video:


Conclusion

My lens most certainly has a bad aperture mechanism. Whether this is a one-off bad copy, or a systematic problem with the lens line is hard to say. I would guess it's an example of poor quality checking, and that most lenses are ok.

This problem annoys me a bit. I've previously found the basic kit lens to be a good one, despite the mixed reception it generally gets online.

Now, this is not really a big issue. Generally, you don't get much bokeh with kit zoom lenses anyway. So the problem is not very likely to show in images. If using the camera at full auto, it generally chooses the maximum aperture anyway, in which case the aperture opening is round.

This problem might affect the exposure correctness. The defective aperture blades could cause slight exposure irregularities. But again, this is not likely to be a big problem

Epilogue

If found the aperture to be so bad, that I took the lens back to the shop where I bought it in the first place.

The store keeper has some problem verifying that his off the shelf lens did not exhibit the same non-round aperture. I helped him by taking a photo with the lens mounted to the Panasonic GF2 camera at f/9, 2 seconds, and removed the lens during the exposure. Looking towards the light through the lens showed that his copy had a round aperture.

So he accepted my lens as defective, and sent it for repair.

After one month, I started enquiring about the lens. I always got the same answer: "The lens is just around the corner, should be in our store the beginning of the next week."

It was not until after three months that the lens finally did arrive in the store. When I went to pick it up, I was told that they simply replaced the lens with a new one. Why let me wait for three months when they would just give me a new copy?

Coming home, I once again checked if the aperture was rounded. I found that my new lens had exactly the same problem, the aperture blades are misaligned. I did check that the new lens has a different serial number, so it is not the same lens that I returned.

Letting me wait three months for a new lens is bad. But giving me a new lens which has the same problem as the one I returned is simply appalling.

12 comments:

  1. Any resolution to this issue? I just picked up a gf3 with the 14mm pancake as well as this 14-42mm and am awaiting shipment. Of course keeping my fingers crossed about the lens exhibiting this issue!

    ReplyDelete
  2. In my follow-up-post, the epilogue says that I got a replacement lens in the end which has an acceptable aperture. It is not perfectly round, but round enough for my taste. I don't expect perfection from a cheap lens like this.

    ReplyDelete
  3. Ah, cheers, must have missed that post. Here's to hoping that mine will be as round as possible!

    ReplyDelete
  4. I think most people would never notice a lens with this kind of flaw. And it is also very rarely that it would affect the images negatively in a significant way. So it is not a huge issue.

    ReplyDelete
  5. You're probably right, had I not read this entry I would have gone on living blithely unaware!

    But seriously though, I'm not a serious photographer and I don't stare endlessly at 100% crop looking for flaws. But I'm glad somebody is.

    ReplyDelete
  6. I truly appreciate your efforts and I will be

    ReplyDelete
  7. You should be a part of a contest for one of the finest websites on the web.

    ReplyDelete
  8. I just now wanted to inform you about how much I appreciate

    ReplyDelete
  9. I must thank you for thfe efforts you’ve put in writing this blog.

    ReplyDelete